14
© 2014 Proceq SA
4.2.2 Operation Pictograms A-Scan (Zonotip
+
only)
Change gate parameters
Select signal section to be displayed
Selection of the measurement method: the instant the signal within the gate exceeds
the threshold (vertical position of the gate) is used for the measurement.
Selection of the measurement method: the distance between the peaks of two signals
within the gate is used for the measurement.
Selection of the measurement method: the peak of the signal within the gate is used
for the measurement.
Selection of the measurement method: Auto Correlation Function (ACF) is applied to
the signals within the gate.
4.3 Setup-Screen
4.3.1 Create a New Material / Edit a Material (Applicable for all Modes)
The Zonotip / Zonotip
+
can store up to 64 different materials. Enter the “Material” menu to create
or edit a new material. Select “Create” or “Edit” on the screen.
Use the
keys to scroll in the table of symbols (“1”). Press the
key
to choose a symbol.
Use the
keys to edit the lines (“2” and “3”).
To jump from the left to the right box (from “2” to “3”), position the cursor on the first position of
the left box and press the
key.