PROCEED CDD Compact Disc Drive, Руководство пользователя

Страница: 29 / 40

29
Programming the CDD
Introduction to Playlists
Rather than playing an entire CD, you may choose to play only certain selections.
To do this, you create a “playlist” for that particular CD. It may be used immedi-
ately upon being created, and will remain in memory until replaced by a differ-
ent playlist.
Before using your CDD’s programming features, become familiar with its controls
and their locations, as well as their basic functions.
Note: During the playing of a playlist, the CDD’s basic functions
operate as described in “Basic Operation,” except that they affect
the playback of the
program , not the entire CD. For instance, press-
ing next during play skips to the next track in the playlist, whether
or not it is the next track on the CD. In the same way, engaging disc
repeat will repeat the entire playlist , not the entire disc.
The CDD allows up to 99 selections per playlist, with any given track appearing
once only. In practical terms, the only limitation on the length of your playlist is
the number of tracks on your disc.
Important Note: Assembling a playlist is possible only when the disc is
stopped.
Assembling a Playlist
To assemble a new playlist:
1. Load a CD, and wait for the display to show the number of tracks
and their total playing time.
2. Using the
next
and
previous
buttons (or the numbered buttons on
the Remote Control), select the first track in your playlist.
3. Add the first selection to your playlist by pressing
p
. The
CDD will acknowledge your command by lighting the green
pro-
gram LED
on the front panel to indicate that the track currently dis-
played has been added to the playlist.
4. Assemble the rest of your playlist by repeating steps 2 and 3. Make
sure to press
p
after each selection.
Programming by Omission
If you want to play
most
of a CD, and just “omit” a few tracks, you may want to
use this shortcut:
1. Load a CD, and wait for the display to show the number of tracks
and their total playing time.
2. Using the
next
and
previous
buttons (or the numbered buttons on
the Remote Control), select the first track you want to
eliminate
from your program.
3. “Omit” the track by pressing
program –
. This action both places
the CDD in its program mode and deletes the track from the cur-
rent playlist. The display will advance to the
next available track