PROCEED CDD Compact Disc Drive, Руководство пользователя

Страница: 26 / 40

26
Basic Operation
Before operating your CDD, take a minute to become familiar with its controls
and their locations. (See
“Front Panel”
and
“Remote Control.”
)
Loading a CD
To load a CD:
1. Enable the CDD’s controls by pressing
standby
if in standby.
2. Press
stop/drawer
to open the drawer.
3. Place a CD into the recess of the drawer, label side up. Handle the
CD by the outer edges and center hole only.
4. Press
stop/drawer
.
Playing a CD
To play all tracks on the CD, press the
play/pause
button. All tracks will play in
order. Play will stop automatically at the end of the CD.
To begin play with a track other than the first track:
1. Before pressing
play/pause
, press
next
until the number of the
desired track shows on the Display. If you pass the track you want
to play, you can “back up” by pressing
prev
. (You may also select
the track directly using the numbered buttons on the Remote Con-
trol.)
2. Press
play/pause to
begin playing that track. The remaining tracks
will play in order. Play will stop automatically at the end of the CD.
Pause
To suspend play while a CD is playing, press
play/pause
. To resume play at the
same point, press
play/pause
again.
If left in
pause
for about two minutes, the transport will stop spinning automati-
cally and the laser will turn off (thereby enhancing the longevity of both). Press-
ing
play/pause
again will resume play at the point where
play/pause
was first
pressed, after a short delay to find the correct starting point.
Random Play
Using the Remote Control, you may have the CDD play tracks totally at random.
To do this, press the
rndm
key, then press
play
. The random LED will illuminate
to indicate the
random play
mode. To cancel
random play
, press
rndm
a second
time, or
stop
.
Navigating the Disc
You may skip to another track any time while a CD is playing. To move to an-
other track, press
next
(to go forward) or
prev
(to go backward) until the number
of the track you want to play shows on the Display. (You may also select the track
using the numbered buttons on the Remote Control.) Play will resume as soon as
the pickup reaches that track.
You may search for a particular passage on the CD using
fast forward
and
rewind,
by
pressing and holding
the
next
and
prev
buttons (respectively). Use the
reduced-volume audible scan available during these modes to search the CD until
the laser pickup reaches the passage you want to hear.