PROCEED CDD Compact Disc Drive, Руководство пользователя

Страница: 30 / 40

30
remaining in the playlist. This next track will be shown with the
green
program LED
lit to indicate that it is still
in
the playlist.
4. Using
next
and
previous
, move to any other tracks you would pre-
fer to skip, pressing
program –
to eliminate each track from the
playlist. Once you are in the program mode, the green
program LED
will illuminate to indicate a track is in the playlist,
and extinguish for any track omitted from the playlist.
Reviewing a Playlist
To review your playlist before playing it:
1. Assemble a playlist and press
stop
.
2. Without selecting any particular track (while the playlist’s total
number of tracks and total playing time are displayed), press
pro-
gram +
. The display will show the first selection in your playlist.
3. To view the next selection, press
p
again, and so on.
4. After you view the last selection, one more press of
p
will
cause the display to “wrap around” to the first track in the playlist.
(Alternatively, you may use the next and prev buttons to step
through all the tracks, noting which tracks are included in the pro-
gram by watching for the green
program LED
.)
Adding a Track
to a Playlist
You also may add a selection to the end of a previously assembled playlist. To do
so:
1. From stop, using the
next
and
previous
(or the numbered buttons
on the Remote Control), select the track you want to add to your
playlist.
2. Add the selection to your playlist by pressing
p
.
3. Repeat steps 2 and 3 for each selection you want to add to your
program. Make sure to press
p
after each selection.
Deleting a Track
from a Playlist
You may delete any selection from a playlist. To delete a selection:
1. Press
stop
after assembling a program.
2. Press
p
until the selection you want to delete appears on
the display.
3. Press
program –
; the display will turn off the green
program LED
to indicate that the current track has been removed from the play-
list.
4. Repeat steps 3 and 4 for each selection you want to remove from
your program.
Deleting an Entire Playlist
You may also delete an entire playlist at once:
1. Press
stop
after assembling a program (to avoid picking any par-
ticular track—you want to delete the entire program).
2. Press
and hold program –
for at least five seconds; the display will
turn off the yellow
program LED
to indicate that the playlist has
been deleted.
3. The CDD will display EP to indicate that is has Erased Program.