77
GB
Connecting - adapters (Fig. 10)
- Figure 10 shows all the tire in� ator
gauges (7) and adapters. They are used
as mentioned above. The connecting
tube (f) can be used to easily connect the
adapter with the tire in� ator (7).
- For all valves with an inner diameter from
8 mm, there is a corresponding adapter
for connecting the tube (f).
- Tire in� ation gauge and quick-action
coupling (page 3 and Figure 2, part 4).
The connection provides reliable air
tightness.
- When cleaning away dust, the blow
adapter (d) can be directly attached to
the tire in� ation gauge with the help of a
wrench.
Mains connection
• The compressor is equipped with a
power cord with a type F electric plug.
This can be connected to any 220V-
240V~ 50 Hz socket outlet with a 10 A
fuse.
• Before commissioning, make sure that
the mains voltage corresponds to the
operating voltage for the machine power
on the data plate.
• Long feed lines, as well as extensions,
cable drums, etc., cause a voltage drop
that can prevent the motor from starting.
• At temperatures below +5°C,
sluggishness and make it diffi cult to start
the motor.