probst STONEMAGNET SM-600, Руководство по эксплуатации

Страница: 78 / 130

14/43
WARNING
Risk of explosion from flammable material being sucked in
►
Ensure that no flammable material (fuel, solvents, etc.) can be taken in
before coming in contact with the lifting device.
CAUTION
Damage to the lifting device from operation in areas with acidic or
alkaline materials or in contaminated atmospheres.
►
Consult with the manufacturer before operating in an area with aggressive
atmospheric conditions.
The lifting device can be operated at temperatures between 3° C and 40° C.
CAUTION
Damage to the lifting device due to use outside of the permitted
temperature range
►
Only use the lifting device at the permitted ambient temperature.
►
Consult with the manufacturer before operating outside of the permissible
temperature range.
Workplace requirements
The operator’s workplace is in front of the handle. Ensure that the operator can constantly monitor the
entire workspace. The workplace must be lit sufficiently and glare-free.
Ensure the area around the workplace is always clean and tidy by providing appropriate internal
instructions and conducting checks.
CAUTION
Damage to the lifting device from small parts being sucked in
►
Keep the site and vicinity of the lifting device free of small parts.
Danger zone definition
•
The danger zone is the area inside, or in the vicinity of working equipment that poses a hazard or
potential hazard to the health of persons located within this area.
•
Lifting the load or transporting may result in the load and the lifting device falling or being lowered.
Therefore, the area directly below the lifting device is essentially a danger zone.
•
During horizontal transport, note that lifting, horizontal acceleration and braking of the load may cause
it to rotate, tilt or swing. The vicinity of the load is therefore a danger zone.
•
It is also necessary for the rigger to maintain a sufficiently safe distance when guiding the load (always
use the handle to guide the load).