probst STONEMAGNET SM-600, Руководство по эксплуатации

Страница: 90 / 130

26/43
Suction plate mounting material is not included in delivery
Item Description Item Description
10 Suction plate 23 Threaded rod
13 C rail 24 Sliding block
22 Ring nut
1. Both threaded spindles must be screwed into the sliding block so the thread is completely screwed in.
2. Insert both threaded spindles into the two mounting holes from below until the threaded spindles
protrude out of the housing on top.
3. Screw the ring nut/2-3 threads loosely onto the threaded spindles.
4. Slide the suction plate C rail over the sliding block from the side.
5. Position the suction plate in the center.
6. Screw the ring nuts tightly and check to see if the suction plate is secure.
7. Attach the vacuum hose to the suction plate.
8. Check airtightness (see section 9.5.3).
9. Inspect safety features before working with loads.
13
22
23
24
10
22