probst HVZ-UNI-II-EK, Руководство по эксплуатации

Страница: 42 / 87

Maintenance and care
40 / 42
V2
GB
8.4 Trouble shooting
ERROR CAUSE REPAIR
Stone layer breaks out (downward)
●
Main clamping is wrong
adjusted (stroke 200 mm)
●
Check the adjustments according
to the adjustment sticker
●
Stone layer is too large
●
Adjust the gripping depth a little
lower, so that the steel lamellas
grip in the lower range of the
stone layer
●
Quality of the stones
●
Check the quality of the stones
Single stones fall out of the stone
layer
●
Dimension of the stone layer
deviate from each other too
strongly
●
Tighten the fixing bolts of the
steel lamellas in the problem
areas of the stone layer (thereby
stronger clamping force)
Stones are not gripped, or fall out
with gripping operation
●
Stones are a little convex
(conditional of manufacturing)
●
Spacer of the stones goes only
to ¾ height of the stone height
●
Stone layer is gripped to far
above
●
Oil pressure is too low
●
Stone layer does not stand
even on the ground
●
Grip tone layer as far as possible
in the lower range
●
Grip tone layer as far as possible
in the lower range
●
Grip tone layer as far as possible
in the lower range
●
Asked the manufacturer for the
necessary oil pressure
<
●
Set stone layer (palette) on even
ground
Stones are not displaced, or not
completely displaced via side
clamping
●
The spacer of the stones avoid
the displacement
●
Toothing of the stones
●
The adjustment of the
positioning adapter is not
correct
●
Displace the stones via the
repeated opening and closing.
●
Stones with toothing cannot be
displaced.
●
Adjust the positioning adapter
correctly.