background image

11

PROBRITE.COM

Please call 1-844-507-5651 or email [email protected] for further assistance.

10

Visit 

www.probrite.com/install

 for installation video tutorials and product support

5-Year Limited Warranty

 

Shut off main power supply before cleaning the product. To prolong the original 
appearance, clean the light fixture with clear water and a soft, damp cloth only.

 

Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, 
solvents, or any other chemicals on this light fixture. They could cause a premature 
deterioration of the finish and may void the warranty.

 

Do not spray the light fixture with a hose or power washer.

Care and Cleaning

Troubleshooting (continued)

OPTION 2: SWITCH CONTROLLED

Switch controlled operation enables the light fixture to 
turn ON and OFF by flipping a switch that controls the 
electricity to the outlet powering the fixture. The light 
fixture will not turn ON and OFF automatically, but is 
manually controlled. 

(Black cover cap already 

installed on the photocell)

 

To enable switch activated operation 
leave the black cap cover on the 
photocell.

A

E

Operation (continued)

Problem

Possible Cause

Solution

Light stays ON

Light sensor is in a shaded 

area

Shine a flashlight into the light 

sensor and wait a couple minutes. 

If the light turns OFF, the fixture 

should be moved to a location 

with enough light in the daylight 

hours  for  the  light  sensor  to  work.                                                
OR place the optional opaque 

cover over the photocell light 

sensor and use the wall switch to 

turn the light ON and OFF.           

Light Sensor is faulty

If the light does not turn off when 

a flashlight is shined on the light 

sensor for a few minutes, then 

the sensor may be faulty. Please 

contact customer service.

Troubleshooting

Problem

Possible Cause

Solution

Light does not 

turn ON

No power to the fixture

Check  if  circuit  breaker  is  tripped                                 
Confirm wall switch is ON
Verify wiring to fixture is correct (turn 

power off to fixture beforehand)

Fixture is sensing daylight

Cover photocell. Wait several 

seconds until fixture turns ON.

Light cycles 

ON and OFF 

continuously

Photocell light sensor is 

sensing reflected light

Relocate light fixture to a location 

where  there  is  no  reflected  light.          
OR place the optional photocell 

cover over the photocell light 

sensor and use the wall switch to 

turn the light ON and OFF.               

Light 

FLICKERS

The light fixture is wired 

through an unsuitable dimmer

Replace the dimmer with a 0-10V 

dimming switch or a standard 

ON/OFF wall switch.

SWITCH

CONTROLLED

This is a limited warranty offered by Probrite for a period of five years from the date of purchase 
to its customers. Probrite warrants to customers that the products will be free from defects 
in material and workmanship. The obligation of Probrite under this warranty is limited to the 
provision of replacement of products and is extended to the original purchaser of the product 
on presenting valid purchase receipt or other proof of date of original purchase acceptable to 
Probrite. The receipt is required for rendering the warranty performance. Any warranty claims 
without original proof of purchase would not be accepted.

It should be noted that the warranty does not apply to Probrite products that have been 
altered or repaired by unauthorized personnel, have been subjected to neglect, abuse, misuse 
or accident or damages caused during shipping. Any other products not manufactured by 
Probrite which have been supplied, installed and/or used in conjunction with Probrite products 
are not covered under this warranty. Any damages caused by replacements bulbs, LEDs or 
corrosion or discoloration of brass components are also not covered by this warranty. 

Limitation of Liability:

In no event Probrite shall be liable for indirect, consequential, incidental or special damages, or 
lost profits. Probrite is not liable for any claims or damage arising out of or connected with the 
manufacture, sale, delivery, use, maintenance and repair or modification of Probrite products, 
or supply of any replacement parts that, exceed the purchase price of Probrite products giving 
rise to a claim. Labor charges to remove or install the fixtures will not be accepted.

To Claim:

Please contact PROBRITE customer service at 1-844-507-5651 or email support@PROBRITE.
com and include your name, address and contact number, along with a copy of the purchase 
receipt and a brief description of the problem.

NOTE: 

Photocell (E) may have a few minute delay, to reduce it's 

sensitivity to sudden light changes. When testing shine a light/cover 

the photocell for a few minutes to check if fixture functions properly

Содержание PWRW50-PC-4K-BZ








Отзывы: