Probrite FSXD30-PC-4K-BZ, Инструкция по установке, использованию и уходу

Страница: 6 / 12

C
6
Visit www.probrite.com/install for installation video tutorials and product support
INSTALLATION (CONTINUED)
3
REMOVE THE
MOUNTING PLATE
NOTE: The mounting plate (C) come
pre-assembled on the light fixture (A) for shipping.
NOTE: The mounting plate set screw (B)
comes pre-installed on the light fixture.
☐
4
INSTALL THE
MOUNTING PLATE
☐
Route the junction box wires through
the large center hole in the mounting
plate bracket (C).
☐
Align the holes on the mounting plate
bracket (C) with the holes of the
junction box. Use two #8 screws (AA) to
attach the mounting plate bracket (C) to
the junction box
TIP: Only unscrew the tightening screw (B) far
enough to remove the mounting plate bracket (C).
Do not fully remove the set screw (B).
(fig 8).
Remove the mounting plate bracket (C)
from the back of the fixture by removing
the mounting screw cover plug (E) and
then loosening the mounting screw (B)
using a philips head screwdriver.
AA
C
(fig 9).
B
E