background image

2

Visit www.probrite.com/install for installation video tutorials and product support 

Table of Contents..........................  2
Safety Information........................  2
Pre-Installation..............................  3
   Planning Installation.........................  3
   Specifications....................................  3
   Tools Required...................................  3
   Package Contents............................  4

   Hardware Included............................ 4
Installation......................................  5
Operation .......................................  9
Care & Cleaning............................  11
Troubleshooting...........................  11
Warranty.........................................  12

TABLE OF CONTENTS

SAFETY INFORMATION

IMPORTANT

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE 
NATIONAL ELECTRICAL CODE AND LOCAL BUILDING CODES BY A PERSON FAMILIAR 
WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS 
INVOLVED.

PRECAUTIONS

 

Please read and understand this entire 
manual before attempting to assemble, 
install, or operate this light fixture.

 

This light fixture requires a 120 Volt AC 
power source.

 

Some codes require installation by a 
qualified electrician.

 

This light fixture must be properly 
grounded.

 

Make sure connections are secure using 
wire nuts, crimp-on lugs or other approved
connecting devices

 

This light fixture should be installed 
outdoors to a wall or eave.

WARNING: 
breaker or fuse. Place tape over the circuit 

light fixture.

WARNING:  Risk of fire. Keep the fixture at 
least 3 in. (76mm) from combustible materials.

CAUTION:  Burn hazard. Allow the light fixture 
to cool before touching.

NOTICE:  Do not connect this fixture to a 
dimmer switch.

INFORMATION:  The device is tested and found to comply with Part 15 of the FCC Rules. Operation is subject 
to two conditions: (1) This device may not cause harmful interference and, (2) this device must accept any 
interference received, including any interference that may cause undesired operation.

These limits are designed to provide reasonable protections against harmful interference when the 
equipment is operated in a commercial environment.

Содержание FSXD30-PC-4K-BZ













Отзывы: