Probrite FSXD30-PC-4K-BZ, Инструкция по установке, использованию и уходу

Страница: 8 / 12

C
8
Visit www.probrite.com/install for installation video tutorials and product support
INSTALLATION (CONTINUED)
6
MOUNT THE LIGHT
FIXTURE
☐
Once wiring is complete, align the
mounting screw hole in the center of the
fixture with the mounting screw hole in
mounting plate bracket (C).
☐
Insert the mounting plate set screw (B) back
through the hole in the center of the fixture
and tighten until fixture is firmly secured
against the wall or eave.
8
CAULK AROUND THE
LIGHT FIXTURE
☐
Caulk around the light fixture (A) and
surface with silicone sealant (not
included).
7
AIM THE LAMP HEADS
☐
After fixture is securely mounted, loosen
screws on the lamp head arms with a
philips screwdriver.
☐
Aim each lamp head (A) toward desired
direction.
☐
Use a philips screwdriver to tighten the
lamp head arm screws, locking lamp heads
in desired position.
☐
From the breaker and switch, turn power
back ON to the light fixture to verify it illuminates.
A
NOTICE: Failure to properly caulk around the
surface and light fixture (A) could lead
to water damage and is not covered under
warranty.
NOTE: When attaching this fixture (A) to a surface
mount junction box, caulk between the light fixture
and junction box.
A A
CAUTION: Keep lamp heads 30° below
horizontal to prevent water damage and
electrical shock.
DD
(fig 11). (fig 13).
(fig 12).
B
E