11
PROBRITE.COM
Please call 1-844-507-5651 or email [email protected] for further assistance.
10
Visit
www.probrite.com/install
for installation video tutorials and product support
Installation (continued)
Installation (continued)
3B
Replacing slipfitter knuckle
with extension arm mount
☐
Remove the plug from the slipfitter arm
(C) of the fixture and loosen the screw
to remove the bottom handle. (Fig. 1 & 2)
☐
Remove the four screws from the
slipfitter upper handle by using the
larger allen key to remove the knuckle
arm completely. (Fig. 3)
☐
Thread the wires through the extension
arm (AA) and align the four holes with
the holes on the fixture head. (Fig. 5)
☐
Fix the extension arm (AA) on the
fixture by tightening the fours screws
removed earlier. (Fig. 6)
Mounting Direct to
Square Pole
(Hardware Included)
Mounting Direct to
Round Pole
(Hardware Included)
Mounting
Direct to Wall
(Bolts provided by others,
depending on wall material)
Extension Arm Usages :
☐
Use the extension arm to mount fixture direct to a
surface like square pole, round pole, or a wall
C
(fig 1).
(fig 2).
(fig 3).
(fig 4).
(fig 5).
(fig 3).
(fig 6).
AA
4B
Drill mounting holes on the surface
(Applicable for wall, square & round pole)
☐
Remove the pole's top cover, if
applicable.
☐
Drill mounting holes into the pole or
surface by referring to the drilling details
in Fig 1.
(fig 1).
Drilling details
IMPORTANT NOTE:
Pay attention to
threading the wire through the center hole in
the (1)bolster plate (HH), (2) the pole, (3) the
round pole adapter plate (DD), and (4) the
extension arm.
HH
HH
AA
AA
DD
Mounting the extension arm
(fig 1).
(fig 2).
For Square Pole Only:
☐
Align the extension arm holes with the holes
drilled on the pole.
☐
Fix the extension arm by inserting the two hex
head bolts (GG) through the extension arm
(AA), the pole and the bolster plate (HH), which
is inside the pole (fig 1).
☐
Tighten the two bolts to 140 in-lbs (16 Nm).
For Round Pole Only:
☐
Use the round pole adapter plate (DD) between
the pole and the extension arm (AA).
☐
Insert the two hex head screws through the
extension arm (AA), round pole adapter plate
(DD), the pole and the bolster plate (HH), which
is placed inside the pole (fig 2).
5B
Electrical
Wires
(through
center
holes)
(wire hole).
