5
PROBRITE.COM
Please call 1-844-507-5651 or email [email protected] for further assistance.
4
Visit
www.probrite.com/install
for installation video tutorials and product support
Pre-Installation (continued)
HARDWARE KIT
NOTE:
Hardware
not
shown to actual size.
AA
BB
CC
DD
EE
FF
GG
HH
Part
Description
Quantity
AA
Extension Arm
1
BB
Wire nut
3
CC
Flat Washers
3
DD
Adapter plate (For round pole)
1
EE
Photocell black cover label
1
FF
Allen Key
2
GG
Hex Head Lag bolts
2
HH
Bolster plate
1
PACKAGE CONTENTS
Part
Description
Quantity
A
Light Fixture
1
B
Photocell NEMA 3-Pin Receptacle
1
C
2-3/8" Swivel Slipfitter Knuckle Mounting Arm
1
D
Extension Arm Mount
1
E
120-277V NEMA 3-Pin Twist-lock Photocell
1
Installation
1
For best results
Extension Arm Mount
Swivel Slipfitter
Knuckle Arm Mount
A
C
B
2
Shut electric power off
☐
At wall switch verify it is in the off
position (fig 1).
☐
At the main electrical panel turn off the
circuit breaker that supplies power to
the outlet box you are working on (fig
2).
☐
For screw-in type fuses unscrew the fuse
that supplies power to the outlet box
you are working on (fig 3).
(fig 1).
(fig 2).
(fig 3).
☐
The fixture can be mounted in the
following ways:
☐
Swivel Slipfitter Knuckle Arm
Mount
: Use the default swivel
slipfitter knuckle on a 2-3/8" to
2-1/2" (O.D) round pipe, or fit to
standard tenon arms for ground,
pole, or wall mounting (tenon arms
sold separately).
☐
Extension Arm Mount
: The fixture
can also be mounted directly on
a square or round pole surface, or
direct to a wall, using the extension
arm supplied separately in the
package.
☐
Install on ground as a flood light or 12-30
feet above the ground for pole and wall
mounting.
☐
Place the photocell (provided separately
in the box) on the receptacle on top of
the fixture and rotate in the direction of
the arrow marked on the photocell.
☐
When mounting fixture, for Dusk to
Dawn operation, make sure the photocell
orientation is at the top for wall mount,
in an area that receives daylight and not
too close to reflective surfaces.
B
E
D
☐
When installing two fixtures on
one switch, make sure the switch
is rated for at least a 1A inductive
load.
☐
The fixture may or may not be
wired to a dimming switch.
Works on 2-3/8" to 2-1/2"
(O.D) round pipe, or fit to
standard tenon arms
Square pole
or wall mounting
Round pole
(use included
adapter plate)
