Probe PMA-H2000, Руководство пользователя, Страница: 16 / 28

MOTION SETUP
OSD -
1 1
2
3
4
2
MOTION SETUP
Setup the general functions of pan/tilt motions.
PWR UP ACTION
This function enables to resume the last action executed before power
down. Most of actions such as preset, pattern, scan and group are
available for this function but jog actions are not available to resume.
JOG MAX SPEED
Sets maximum jog speed. Jog speed is inversely proportional to zoom
magnification. As zoom magnification goes up, pan/tilt speed goes down.
JOG DIRECTION
If you set this to ‘NORMAL’, the view in the screen is moving same
direction with jog tilting. If ‘INVERSE’ is selected, the view in the screen
is moving reversely.
<ALARM INPUT SETUP>
Moves to ‘ALARM INPUT ACTION’ screen.
ON / OFF
30/SEC ~ 150/SEC
NORMAL / INVERSE
ALARM INPUT SETUP
If an external sensor is activated, camera will move to
corresponding action.
3
ALARM INPUT SETUP - Type Setup
1) Move joystick up/down to set alarm type.
2) Move joystick right to set alarm action.
ALARM INPUT SETUP - Alarm Action Setup
1) Move joystick up/down to set the action(HOME, PRESET,
SCAN, PATTERN, GROUP) and number.
2) Move joystick left/right to move the focus to set alarm type,
function name and function number.
3) By pressing near key, save the current setting.
4
Alarm Number
Alarm Type
- Sets sensor input type.
- Refer page 14 for more detailed information.
Alarm Action
Assign counter-action to each alarm input. Among 149 actions, choose
the action as explained below.
1
N.O(Normal Open) / N.C(Normal Close)
NOT USED / HOME / PRESET 1~255 /
SCAN 1~8 / PATTERN 1~4 / GROUP 1~8
<
MOTION SETUP
>
====================================================
POWER UP ACTION
JOG MAX SPEED
JOG DIRECTION
<
ALARM INPUT SETUP
>
BACK
EXIT
ON
100/SEC
NORMAL
3
‘<ALARM INPUT SETUP>’ select
and press the ‘NEAR’ Key
<
ALARM INPUT SETUP
>
====================================================
ALARM 1
BACK
EXIT
NOT USED N.O
<
ALARM INPUT SETUP
>
====================================================
ALARM 1
BACK
EXIT
NOT USED N.O
<
ALARM INPUT SETUP
>
====================================================
ALARM 1
BACK
EXIT
NOT USED N.C
Select ‘Alarm Number’
by move joystick up/down.
And press the ‘NEAR’ key
Select ‘Alarm Type’
by move joystick up/down.
And move joystick right.
Select ‘Alarm Action’
by move joystick up/down.
And press the ‘NEAR’ key to save.