Installation Using Ceiling Mount Bracket (Option)
Installation -
Rubber Gasket
Rubber Gasket
2
Connect Wire the
Cables and
Terminal Blocks
Fix the Surface
Mount Bracket
Fix the Ceiling
Mount Bracket
2
3
4
5
Fix the Main Body
6
Detach the
Protection Film
2
1
2
1
5
3
4
6
Drill the Ceiling and Fix the Anchor Bolts
On the ceiling, drill a hole (6mm diameter/ 50mm depth),
and fix the anchor bolts.
Fix the Ceiling Mount Bracket
1. Drill a hole (20mm diameter) on the pipe of the bracket
to pass the cables.
2. On the fixed anchor bolts, attach the rubber gasket
and screw the ceiling mount bracket.
Drill the Ceiling
To pass cables to upside of ceiling, drill a hole (30mm
diameter) on the ceiling.
Fix the Ceiling Mount Bracket
Pass the cables into the ceiling mount bracket, and
screw the ceiling mount bracket to the ceiling.
Fix the Surface Mount Bracket
Pass the cables through the hole of the surface mount
bracket, screw the surface mount bracket to the ceiling
mount bracket.
Connect Wire the Cables, Terminal Blocks
- Connect the terminal blocks to the main body.
- Refer the 8 page for detailed information.
Fix the Main Body
Screw the main body to the surface mount bracket.
(Screws are included in the main body.)
Detach the Protection Film
Detach the protection film from the dome cover.
1. Installing on the Concrete Ceiling
2. Installing on the Wooden Ceiling
Drill the Ceiling and
Fix the Anchor Bolts
1