background image

Operating instruction RAPTOR 4all & 4you 

 

8

 

 When travelling on poorly maintained 

paths (e.g., large gravel, potholes) there is an 
increased risk of puncturing your tyres as well 
as tipping. 

 If you encounter new driving situations 

which are unknown to you, approach them with 
great care. If you consider that the risk is too 
high, you must immediately abort the driving 
manoeuvre and, if required, call for help to 
assist you in extracting yourself from this 
situation. 

 You must not make telephone calls while 

driving. 

 Operating the product can affect other 

devices, for example theft protection barriers in 
department stores. 

 When driving, never jerk the handlebars to 

the left or the right, as this may cause the 
product to tip over sideways in certain 
circumstances. 

 While driving, never grab onto the area of 

the wheel, in the area of the chain / sprockets / 
chain wheels or into other rotating parts; if you 
do you may cause injuries. 

 Only brake the product using the service 

brakes. 

 During long trips the brakes of the product 

may heat up. Therefore, do not touch the 
brakes during or immediately after the trip (e.g. 
when detaching the drive unit or loading the 
product). 

 If the situation allows it, the speed should 

be reduced by carefully applying the service 
brake. Abrupt braking can cause the upper 
body to fall forwards which can thereby result 
in injuries or loss of vehicle control. 

 The product is only designed to be used 

to transport persons with limited mobility and 
must not be used for any other purpose, e.g. 
by playing children or to transport goods. 

 If the weight load on the drive wheel falls 

(e.g. when driving on slopes) or when driving 
on loose / slippery surfaces, the braking action 

of the wheel may be considerably reduced. 
The driving style and speed should be adjusted 
so that the product can be safely stopped at all 
times using the brakes. 

 Always check the tight fit of the eccentric 

pin and the securing cord. 

 Make sure that cables and lines are not 

kinked or caught up somewhere. This could 
cause them to be damaged which could lead to 
the brakes and gear shift not working correctly. 
In this case, the product must no longer be 
operated. 

 Smoking when riding is forbidden as the 

seat and back system may be damaged from 
ash falling down. 

 When the product is exposed to direct sun 

radiation or low temperatures for longer 
periods, take note that the parts of the product 
may become very hot (>41°C) or very cold 
(<0°C).  

 

14  Safety instructions regarding 

obstacles 

 Driving on steps with the product is 

forbidden. 

 Obstacles like curbs, for example, should 

always be negotiated driving forwards and 
always using the minimum speed required. 

 The ground clearance is decisive with 

regard to negotiable obstacle heights. You will 
find ground clearance in chapter 8.3. 

 When driving over or passing obstacles, it 

is important that you avoid any product or body 
parts catching on the obstacle as this may lead 
to falling causing serious injuries to the user 
and third parties as well as damage to the 
product. 

 Always drive over curbs or other obstacles 

so that you cross them to the front or at right 
angles. If you approach them at an angle, or 
only have one rear wheel on the obstacle, 
there is an increased risk of tipping over to the 

Содержание RAPTOR 4all













































Отзывы: