Usage instructions for NJ1 adaptive bike
23
Rohloff components:
www.rohloff.de/en/
Mountain Drive bottom bracket gearshift:
www.haberstock-
mobility.com/index.php/home-en.html
Sigma:
www.sigmasport.com/en/
Subject to changes to the links provided by the
component manufacturers.
20 Storage
Store the product on an easy-to-clean surface
in a dry environment, preferably at room tem-
perature from +15°C to +25°C.
For storage please also comply with the notes
in other sections of these usage instructions
and the component manufacturers' usage in-
structions included with delivery.
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
not be exposed to any aggressive environmen-
tal influences (especially salt) or to any strong
solar radiation. Because of the effect of salt
water in the winter and the humidity on rainy
days, it is not recommended to store the prod-
uct in the garage.
If the product is not used or is stored over
a longer period, if necessary, before using it
again, we recommend having a rehabilitation
specialist dealer give it a general function and
safety check.
For the electronic Shimano gearshift:
Unused rechargeable batteries should prefera-
bly be stored somewhere between 10°C and
25°C.
21 Transport
21.1 Securing handling of the product
When loading or transporting, the product can
be held on the bottom bracket support and on
the wheel. As such, it is useful to actuate the
parking brake to prevent the wheel from turn-
ing when loading the product.
21.2 Passenger transport in vehicles
When transporting in vehicles, it
must be noted that the product is
not approved for use as a seat in
vehicles or disabled person's vehi-
cles when combined with a manual wheelchair.
The product must be uncoupled from the
wheelchair and secured in the vehicle. For
transporting the wheelchair user or other per-
sons with their wheelchairs in vehicles, ob-
serve the instructions in the usage instructions
of the wheelchair.
21.3 Securing the product in a vehicle
(without a person)
To reduce the weight when loading, depending
on the equipment, some components can be
removed from the product and stored sepa-
rately. The product and all associated compo-
nents must be secured during transport so that
they are not damaged and do not become a
hazard to persons or other products. Before
transport, check with your vehicle dealer about
safely securing it using the existing fitted lash-
ing rings or other securing devices. Suitable
brackets are mostly available in the vehicle
and are described in the operating manual of
the vehicle.
When the product is in the transport vehicle,
you or the person accompanying you should
proceed as follows:
1. Operate the parking brake.
2. Secure and safely stow any components
from the product which have been previ-
ously removed.
