Usage instructions for NJ1 adaptive bike
22
At regular intervals, check that all of the
connections, lines, bleed screws and the sur-
face of the transmitter unit do not leak and that
all the screw connections on the brake system
are tightened securely.
At regular intervals, check that the brake
pads and discs are free from grease, oil or
other contamination. In addition, check the
thickness of the brake disc. The minimum
thickness is printed on the brake disc. In addi-
tion, the brake pad thickness must be checked
with a measuring calliper. The minimum pad
thickness plus support material is 2.5
mm.
Do not drive if your brake system is faulty
in one of the previously listed points. Contact
your rehabilitation specialist dealer immediate-
ly, who will arrange for maintenance by PRO
ACTIV.
19.6 Lights
The basic equipment includes a
light set with
a separate rechargeable battery including a
charger
. The front lights are installed on the
front of the product and the rear lights are gen-
erally installed on the back cross bar on the
back of the coupled wheelchair. The lights are
switched on and off using the respective actua-
tion button on the lights.
Figure 39: Actuation button for the front lights
Figure 40: Actuation button for the rear lights
19.7 Bell
The bell can be actuated with the thumb or
index finger without letting go of the handlebar.
Figure 41: Bell
19.8 Manufacturer instructions
You will be instructed about the functions and
operation of the gears, brakes and other brand
components during the hand-over / training.
You can also get information later from the
component manufacturers’ enclosed usage
instructions, or if needed, by asking your reha-
bilitation specialist dealer or PRO ACTIV.
In the download area of
www.proactiv-gmbh.de
under the links "more documents
>>
", we have
put together the most important documents.
More extensive information can be found on
the manufacturers' websites:
Shimano components:
https://si.shimano.com
Magura components:
www.magura.com/en/components/
Press
Actuation button for the rear lights
Actuation button for the front lights
