7
TECHNICIAN SETUP MENU
Fahrenheit/Celsius Display
12 or 24 Hour Time
Gas or Electric Setup
Gas:
For systems that control the fan
during a call for heat, put the fan
operation switch to the
GAS
position.
Electric:
The thermostat operation
switch should be put in the
ELEC
position. This setting allows the
thermostat to operate the fan when
the fan relay is connected to the
G
terminal.
Select
F
or
C
with the jumper pin on the
back of the thermostat.
F
is for
Fahrenheit and
C
is for Celsius.
12 or 24 hour (military time) can be
selected with the jumper pin.
Important:
The
RESET
button must be pressed
after changing any switch or jumper
pin setting. Batteries must be
installed for this operation.
12 or 24 hour
jumper pin
Select
F
or
C
with the jumper pin
Reset button
