8
TECHNICIAN SETUP MENU
If
ON
is selected the
beep will sound.
If
OFF
is selected,
there is no sound.
OFF
ON
Heat - Off - Cool
Adjustment Options
Factory Default Settings
When any key is
pressed an audible
beep will sound.
There is an
ON
or an
OFF
.
You can configure the
system switch for the
particular application:
Heat
Off
Cool
Em Heat
or
Heat
Off
Cool
Auto
Em Heat
Tech Setup Steps (Continued from the previous page)
Contractor
Call Number
Beep
System
Switch
LCD Will Show
Use the or
key until the desired
application is
flashing.
Note:
If Contractor Call Number is selected
ON, your phone number
will show in the display if there has been a continuous call for heating
or cooling for 24 hours or if the light button is held down for 3 seconds.
To remove the phone number from the display, hold the light button
down for 3 seconds.
Gas Auxiliary
for Heat Pump
OFF
If Emergency Heat is
seleted
ON
you will
see this option.
ON
will turn off the
1st stage of heat 45
seconds after the
second stage turns on.
For heat pump
systems that are
“dual fuel” (use a
gas furnace for
second stage heat)
you can turn this
feature on to turn off
the heat pump when
the second stage of
heating has been
called for.
Allows you to put your
phone number in the
display.
Select
ON
to use this
feature then press
NEXT STEP
.
Use the or
key to move from one
character to another.
Use the or
key to change the
flashing character to
your desired number.
