To customize your 7 day program schedule, follow these steps:
Select
HEAT or COOL using the SYSTEM key. You have to program heat and cool each separately.
Press
MENU
Press
SET SCHEDULE
Note: Monday is displayed and the WAKE icon is shown. You are now programming the WAKE
time period for the Monday setting.
Use the or key below the time setting to make your time selection for the weekday
WAKE time period. Note: If you want the fan to run continuously during this time period, select ON
with the
FAN key.
Use the or temperature setpoint keys on the right side of your screen to make your tem-
perature selection for the weekday
WAKE period.
Press
NEXT STEP
Repeat steps 4 thru 6 for Monday
LEAVE time period, for Monday RETURN time period, and for
Monday
SLEEP time period.
Repeat steps 4 thru 7 for each of the remaining days in the week.
PROGRAMMING THE THERMOSTAT
12
1.
2.
3.
4.
5.
6.
7.
8.
A Note About Auto Changeover:
Auto changeover will switch between heating
and cooling as needed. It is very important to
make sure the cooling setpoint temperature is at
least 5º above the heating setpoint temperature
and that the heating setpoint temperature is at
least 5º below the cooling setpoint temperature.
A Note About Programmable Fan:
The programmable fan feature will
run the fan continuously during any
time period it is programmed to be
on. This is the best way to keep the
air circulated and to eliminate hot &
cold spots in your building.
