All Info Copyright © Pro Spot International Inc.
4 Operation
Page 15
There are two different ways to set the weld power. One is by selecting
1-4 batteries for two sided welding. It is reccommended to use 3-4
batteries for all two sided welding procedures, if using 1-2 batteries,
weld power will be limited and will create a substandard weld.
The other adjustment available is the WELD TIME Switch - it is
used to set the duration of the weld. 250ms is a recommended setting
for weld time, if you choose a longer weld time, you will risk draining
of the batteries more quickly.
Always keep electrodes sharpened and properly aligned,
this will minimize the need for high weld times & will help to
maintain weld quality.
The Hybrid Spot is a multi-functional resistance spot welder. It is equipped with a
four weld cable system for your convenience. Two of the weld cables are connected
to the Two-Sided Spot Gun and the other two are connected to the
Single-Sided Weld Gun.
For Two-Sided welding, use 3 to 4 batteries in the ON position.
For Single-Sided welding, use 1 battery in the ON position. Using more than one
battery for Single-Sided welding will result in burn through due to excessive
weld power.
Pneumatic air is used for:
- forcing the spot gun to close and open.
- cooling the welding cables that are connected to the spot gun.
The air pressure is regulated with the air regulator, and the set pressure is indicat-
ed on the pressure gauge. Default pressure is 90 PSI.
Change the air pressure as follows:
1.
Unlock the pressure regulator by pulling on the adjustor knob till it snaps into
the unlocked position.
2.
Turn the pressure regulator knob clockwise to increase or counter-clockwise to
decrease the air pressure.
3.
Lock the pressure regulator by returning the knob to the lock position.
4.6 - 4.7 Setting/Changing the weld program
4.5 Setting the pneumatic air pressure
4.4 Choosing the weld mode
16
Hybrid Spot
