6 Single-Sided Welding
Page 31
All Info Copyright © Pro Spot International Inc.
Pro Pull comes with three different
Blocking Plates with Quick-Connect design.
Block window size:
2.5"(63mm) x 1.5"(38mm)
Block window size:
1.75"(44mm) x 1"(25mm)
Block window size:
0.75" (19mm) dia.
PP-10-04
PP-10-03
PP-10-01
Large openings for
great visual control
of the pulling area.
Retrofit point for different end adapters.
Available for most weld guns.
(not included) See prospot.com for more
information.
Removable weld shaft.
The weld current is
transferred through the shaft
and NO CABLE is required
to transfer the current
CLT-55
Electrode
N-38
Nut
CLP-75
Make sure the ground plate is clamped firmly in place on the inside of a
clean metal surface as near as possible to the weld location.
NOTE:
Do not attach the ground to the metal you're about to weld on.
When performing other weld tasks such as dent pulling, etc., the ground
attachment location becomes less critical.
Pro Pull can
be
fitted to most
resistance
spot welders
or dent pullers.
Welder &
Adapters
not included.
Pro Pull is a patented, innovative tool for fast and accurate dent pulling. It
features paintless dent removal functionality (
see sec. 6.3.5 “Paintless Dent
Pulling With Pro Pull”
).
6.9.2 Pro Pull Component Diagram
6.9.1 Selecting Pro Pull Weld Mode
6.9 Pro Pull Dent Pulling (optional)
Assurez-vous que la plaque de terre est serré fermement en place à
l'intérieur d'une surface propre de métal le plus près que possible au lieu
de soudure.
NOTE:
Ne fixez pas le terre et le métal que vous êtes sur le point de
soudre. Lors de l'exécution d'autres tâches comme la soudure dent de
traction, etc, le terre du lieu de saisie devient moins critique.
33
Hybrid Spot
