8896235
Metal Cutting Scroll Saw
V1.0
12
For technical questions call 1-800-665-8685
9.2 Place both plain end blade adapters in the depressions on the
upper rocker arm. Tighten the set screws (Fig. 3-4) in each
adapter with a hex key to secure the saw blade. Tighten the
screw on each side of the adapter to keep the blade centered.
10. Hook the lower adapter onto the crossbar of the lower blade
holder. Hook the upper adapter onto the crossbar of the upper
blade holder. The teeth must face downward.
11. Reinsert the table insert (N) into the table.
TILT ANGLE ADJUSTMENT
The tilt angle indicator (Fig. 4-1) may require calibration before using the
tool. The saw blade must be installed before adjusting the table.
1. Loosen the table tilt locking knob (Fig. 4-2).
2. Place a small 90° square on the table and
align it against the saw blade.
3. Push the table down or lift it up until the table
is square with the saw blade.
4. Tighten the locking knob.
5. Loosen the screw on the tilt indicator (Fig. 4-1).
6. Rotate the tilt indicator until the point is
centered on the zero degree (0°) gradation.
Tighten the screw enough to secure the
indicator without moving it.
CONNECTING TO A DUST COLLECTOR SYSTEM
Connect a 1-1/4 in. hose or collection bag to the dust port (G) and
secure it with a spring hose clamp.
Fig. 3
Fig. 4
