8886442
19.2V Cordless Grease Gun
V1.0
6
For technical questions call 1-800-665-8685
CHARGER SAFETY PRECAUTIONS
WARNING! Voltage is present at the charging terminals, do not
probe with conductive objects. Electric shock or electrocution
may result. A battery short can cause a large current flow,
overheating, possible burns and even a breakdown of the tool.
Before using the charger, read all instructions and cautionary markings
on the charger, battery pack and the product using the battery pack
.
The term battery in this precaution includes an individual battery, a
battery pack and the internal battery of a tool.
1. Only use the included battery charger to recharge the battery.
Other chargers may be unsafe, causing an electrical short circuit
or fire.
2. Disconnect the charger from its power source before attaching or
removing batteries.
3. Charge the battery in a well-ventilated area and never obstruct the
vents in the top and bottom of the charger. Place the charger on a
flat non-flammable surface and away from flammable materials
when re-charging the battery.
4. Do not place any object on top of the charger or place the charger
on a soft surface that may result in excessive internal heat. Place
the charger in a position away from any heat source.
5. Charge the battery at rates recommended by the battery
manufacturer.
6. Do not use the charger with an extension cord. This can cause a
low voltage outage during charging.
7. Do not charge leaking batteries. A compromised casing will release
volatile chemicals and gases. Charging a leaking battery can
cause a fire or explosion.
8. Do not operate the charger if it has received a sharp blow, been
dropped or otherwise damaged in any way. Have it serviced or
replaced.
9. Do not disassemble the charger or battery. Take it to an electrician
or power tool repairer when service or repair is required. Incorrect
reassembly may result in a risk of electric shock, electrocution or fire.