8355331
7 PC QUICK CHANGE RATCHETING
V1.0
WIRE TERMINAL CRIMPER KIT
6
For technical questions call 1-800-665-8685
you hear the first click of the ratchet mechanism. Continue
until the terminal is held in place, but not compressed.
4. Slide the bare wire into the terminal and hold in place.
5. Squeeze the handles to compress the terminal until it is
fully collapsed around the wire.
6. Press the release lever (I) to open the jaws.
7. Remove the terminal and gently pull the wire to test if it is
secure. If it pulls free from the terminal, discard the terminal
and repeat with a new one.
A
Insulated Terminal Jaw
AWG 22-18, 16-14, 12-10
mm
2
0.5–1.0, 1.5-2.5, 4.0-6.0
B
Non-Insulate Terminal
Jaws
AWG 20-18, 16-14, 12-10, 8
mm
2
1.5, 2.5, 6.0, 10.0
C
Open Barrel Terminal
Jaws
AWG 20-18, 16-14, 12-10
mm
2
0.5–1.0, 1.5-2.5, 4.0-6.0
D
Insulated Cord–End
Terminal Jaws
AWG 22, 20, 18, 16, 14, 12
mm
2
0.5, 0.75, 1.0, 1.5, 2.5, 4.0
F
Insulated Huge Cord-
End Terminal
AWG 10.0, 8.0, 6.0
mm
2
6.0, 10, 16
H
Open Barrel Terminal &
D-Sub V3.5 Jaws
AWG 14, 22, 8.0-6.0
mm
2
2.5, 0.5, 8.0-10
Table 1