8
For technical questions call 1-800-665-8685
V 3.05
8344558
5 pc Short Barrel Air Hammer Kit
USE AND CARE OF TOOL
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2. Do not carry the tool with fingers near or on the
trigger/switch.
3. Avoid unintentional starts. Be sure that the regulator/throttle
switch is in the neutral or OFF position when not in use and
before connecting it to any air source.
PARTS IDENTIFICATION
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the parts list are included.
Contents:
• Air Hammer with attached inlet bushing
• Retaining clip
• 4 chisels
ASSEMBLY
When this manual refers to a part number, it refers to the included
Parts List.
ACCESSORY INSTALLATION
1. Remove the internal packing grease from the tool before the
first use. See Lubrication for instructions.
2. Disconnect the tool from its air source and discharge any
residual air before attaching or changing chisels, bits
or accessories.