Visit www.princessauto.com for more information
13
8344558
V 3.05
5 pc Short Barrel Air Hammer Kit
Pr
oblems
Po
ssible Causes
Sugges
ted Solutions
1.
Remove chisel and spring retainer.
2.
Push punch through hole in the cylinder until resting against the piston.
3.
Sharply strike punch with a hammer to loosen piston.
4.
If still jammed, disassemble barrel from housing and use punch to push piston through the rear of barrel.
5.
Clean the barrel and piston and remove any rust.
6. Reassemble.
7.
If unable to free piston, contact Princess Auto for a solution.
Tool will not shut off.
O-rings throttle valve dislodged from seat inlet valve.
Contact Princess Auto Ltd. for a solution. If unable to do so, have a qualified technician service the tool.
Loss of power or erratic performance.
Excessive drain on the airline. Incorrect size or type of
hose connectors.
Check the airline and confirm the hose fitting
is correct for the
inlet bushing.
Moisture or restriction in the airline/tank
Depressurize system
and drain tank and airline of water.
Air compressor has
insufficient flow.
Ensure tool is connected to a compressor with a rate flow that matches
the tool.