background image

Pro-Lite, Inc.

E32-A user manual

3

1. Overview

1.1 Introduction

E32-A is a wireless serial port module (UART) based on SEMTECH's LLCC68 RF chip. It has multiple

transmission modes, working in the 432MHz~435MHz, (default 433MHz), LoRa spread spectrum technology,

LLCC68 features LoRa™, which will bring longer communication distance, and has the advantages of concentrated

power density, meanwhile it has a very strong confidentiality. the modules of 20dBm transmitting power adopt industrial
grade 32MHz crystal oscillators to ensure the stability and consistency, its precision is lower than the widely adopted
10ppm.E32-A is in stable bulk production and are widely applied in utility meters, IoT renovation, smart home, etc. The
modules feature data encryption and compression. The data transmitted in air features randomness.

air Data Rate (Default 2.4kps). The encryption-decryption algorithm makes data interception meaningless. And the

data compression enables shorter transmitting time and lower rate of being interfered, which increased the reliability and
transmitting efficiency.

1.2 Features

Communication distance tested is up to 8km

Maximum transmission power of 100mW, software multi-level adjustable

Support the global license-free ISM 433MHz band

Support air date rate of 2.4kbps

19.2kbps

Support new generation LoRa technology based on LLCC68

Low power consumption for battery supplied applications

Support 2.3V~5.2V power supply, power supply over 3.3 V can guarantee the best performance

Industrial grade standard design, support -40 ~ 85 °C for working over a long time

IPEX and stamp hole optional, good for secondary development and integration.

1.3 Application

Home security alarm and remote keyless entry

Smart home and industrial sensors

Wireless alarm security system

Building automation solutions

Wireless industrial-grade remote control

Health care products

Advanced Meter Reading Architecture(AMI)

Automotive industry applications.

Содержание E32-A






















Отзывы: