background image

 
 

Customer Responsibilities 

 

• 

Review and sign the Pre-Delivery Inspection (PDI) report for the boat and motors with your dealer 
to ensure that your boat is in top condition when you take delivery. 

• 

Examine the boat at time of delivery to insure that all systems and components are functioning 
safely and properly.  Report any outstanding issues (i.e., scratches, missing items, etc.) to your 
dealer before or during the delivery of the boat. 

• 

Read all literature and instructions to ensure proper usage and operation of the equipment as well 
as how to use and maintain all equipment as directed. 

• 

Read and understand the limited warranty.   Sign the warranty registration card and mail it to Pro-
Line Boats. 

• 

Contact your local Pro-Line dealer for assistance with any warrantable repairs. 

• 

Transportation of your boat to and from your dealer or repair facility for warrantable repairs. 

• 

Schedule your 20-hour boat and engine check up with your dealer. 

• 

Know your boat and the rules of the road before you use your boat. 

• 

Be proficient in boat handling and safety.  This manual is not intended to provide complete 
training on all aspects of general boat operations.  We at Pro-Line urge all boat owners 
and operators to attend a boating safety course before operating a boat. 

 
 

Capacity Information 

 
In accordance with the National Marine Manufacturers 
Association (NMMA) and the American Boat and Yacht Council 
(ABYC), all boats 26 feet in length or less are required to 
display a capacity plate.  Your 23 Bay is rated for the following 
capacities. 
 

• 

Maximum capacity of persons may not exceed 
8 passengers.  The combined weight of those 
passengers may not exceed a total combined 
weight of 1,150 pounds. 

• 

Total weight including passengers, motor and 
gear may not exceed 2,000 pounds. 

• 

Maximum horsepower is not to exceed 300. 

 
 
These capacity standards are based on Standards and 
Recommended Practices for Small Craft published by the 
National Marine Manufacturers Association (NMMA). 

 

 

Owner’s Package 

 
Each Pro-Line boat comes with an Owner’s Package that contains this Owner’s Manual along with materials 
supplied by various manufacturers whose products have been installed on your boat.  Manufacturers of certain 
products (i.e., Stereo, TV, Stove, Refrigerator, Microwave, Engines, Electronics, etc.) provide their own limited 

 

2

Содержание 2008 23 Dual Console

























































Отзывы: