4
KNOW YOUR LIFT
To Engage Locking Mechanism, press
Height Locking Lever forward against
Lift Frame. To disengage locking
mechanism, pull Lever back against
Hydraulic Unit.
Release Pedal
Hydraulic Unit
Lift Pedal
Sleeve
Handle
Lift Saddle
Height
Locking/Unlocking
Lever
Oil Filler
Plug
Casters
INSPECT BEFORE EACH USE
Do not use if cracked, broken, bent or otherwise damaged parts are noted or if the lift is suspected to have been
subjected to a shock load. A shock load is caused by rapidly opening and closing the release valve while the lift is
loaded. Such operation may result in a hydraulic overload which may disable the hydraulic unit. Owner and operators
of this device shall be aware that no serviceable or replaceable parts are available for this device other than those
parts listed on page 6. Any lift that appears to be damaged in any way, is worn or operates abnormally shall be
removed from service immediately until such time as repairs can be made. Do not attempt to weld, rivet or otherwise
repair this device. DO NOT modify or alter this device. It is recommended that an annual inspection be done to this
device by qualified persons and that missing or damaged labels, warning safety decals be replaced with ones that
are factory authorized.
OPERATING INSTRUCTIONS
1. Position Lift under appropriate lift point, centering load on lift platform.
2. Locate and pump the lift pedal until the lift platform comes into contact with an appropriate lift point.
3. After centering the load, slowly and carefully raise the lift platform by pumping the lift foot pedal.
4. Lock both swivel casters by pressing down on the caster lever marked ‘lock’.
5. Continue pumping until the load has reached desired height. Secure the load using appropriate tie down means.
Four tie down loops have been provided on the frame of the Lift. Make sure that the height locking mechanism is
fully engaged before working on or around the loaded Lift.
WARNING:
Clear all tools and personnel before lowering load.
6. To lower, disengage height locking lever and depress release pedal. It may be necessary to slightly raise the lift
platform before disengaging the height locking lever.
