3
4. Align the holds between the clevis and the jack. If necessary, use lift pedal to pump up the saddle of
the bottle jack and / or lift up the saddle for the alignment.
1. Install hydraulic unit into
receiver and secure with
provided 7.5mm x 22mm
bolt, using appropriate tool
(not provided).
2. Install lift foot pedal into
sleeve,secure with bolt.
3. Swing the top frame.
5. Insert the shaft to holes.
6. Insert the locking pin on the shaft.
8. Install the return spring by fixing both its
ends across the height of the hydraulic unit.
CAUTION: Beware of the tensile force of
the spring during installation.
9. Install handle into frame and secure using the provide pins
10. Ensure assembly rolls freely, locks, and lowers easily. Get to know how the release pedal, lift pedal, and the height
locking and unlocking mechanism work prior to loading the lift.
ASSEMBLY
7.5mm x 22mm bolt
Shaft
Locking Pin
Return Spring
The Bolt
7. CAUTION: USE PROTECTIVE EYE WEAR
Before installing the return spring ensure that the
bolt is secured to a minimum depth of 7 threads or
7mm and that the nut is tightened.
