2
2
Important safety instructions
When using electrical appliances, you should at all times observe basic safety measures,
including the following:
1. Before using the fryer, read the instructions carefully.
2. Do not touch any hot surfaces. Use the handles and wear oven gloves.
3. Before using the fryer, check whether the mains voltage corresponds with the specifications
on the model identification plate on the bottom of the fryer.
4. Do not switch on the fryer until all of the components have been properly installed.
Make sure the lid is closed before you plug the fryer into the mains and switch it on.
5. To avoid electric shock, do not immerse the mains lead, the mains plug or the fryer in water
or other liquids.
6. Be careful when using the fryer in the vicinity of children.
7. Remove the mains plug from the socket when the fryer is not in use, or before cleaning.
Allow the fryer to cool before assembling, disassembling or cleaning it.
8. The fryer should never been used if the mains lead or plug is damaged, or if it is
malfunctioning or damaged in any way. If the fryer is defective, it should be taken to an
authorised service centre for examination, repair or adjustment.
9. Incorrect use of the fryer or accessories not recommended by the manufacturer may lead to
injury.
10. The fryer should be used only as specified. The fryer is intended solely for non-commercial,
household use indoors.
11. When using the fryer, always start by connecting the mains lead, before plugging the lead
into the mains. After use, switch of the switches to ‘OFF’ before unplugging the fryer from
the mains.
12. The fryer must be connected to an electrical circuit that is not running any other electrical
devices. If the electrical circuit is overloaded by other appliances, the fryer may not work
properly.
13. When moving a fryer containing hot food, you should exercise extreme caution.
14. The fryer should not be placed on or near a hot gas or electrical heat source or in a heated
oven. It should also not be placed in the vicinity of combustible materials, such as curtains,
when the fryer is switched on.
15. When the fryer is switched on, be sure it is kept at a safe distance from other objects.
16. Do not allow the mains lead to hang over the edge of the table or the kitchen worktop, or
come into contact with hot surfaces.
17. The mains lead should not be allowed to hang loosely.
18. The mains lead should not be pulled when the fryer is being unplugged from the mains.
19. Do not overload the black Teflon bowl. It can hold a maximum of 4kg of food.
20. The fryer should not be covered while switched on.
21. Clean the lid, the windows, the odour/splash shield using a sponge and mild soapy water.
Note that any loose pieces of sponge could come into contact with electrical components,
which could, in turn, cause electric shock.
