31
b.
If the walking belt slips when walked on,
first re-
move the key and
UNPLUG THE POWER CORD.
Using the hex key, turn both idler roller bolts clock-
wise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in. (5 to 7 cm) off
the walking platform. Be careful to keep the walk-
ing belt centered. Then, plug in the power cord, in-
sert the key, and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is
properly tightened.
PROBLEM: The iFit Live mode does not function correctly
SOLUTION:
a. If the iFit Live mode is not functioning correctly, make sure that the treadmill has the most current
firmware available (see step 8 on page 27).
PROBLEM: The treadmill will not connect to the wireless network
SOLUTION:
a. Perform a network test (see step 6 on page 27).
b. Make sure the wireless settings on your console are correct (see step 2 on page 24).
c. Make sure the settings for your wireless network are correct.
d. If you still have questions, see the front cover of this manual.
PROBLEM: The buttons on the screen do not work correctly
SOLUTION:
a. If the screen is not properly calibrated, it will be difficult to touch the correct buttons on the screen.
To calibrate the screen, see step 5 on page 26.
b
