Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two persons.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
•
Tighten all parts as you assemble them, unless
instructed to do otherwise.
•
As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
•
For help identifying small parts, use the PART
IDENTIFICATION CHART.
In addition to the included hex key and grease
packet, the following tools (not included) are
required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1.
Attach the Front Leg Foot (14) to the Front Leg
(3) with an M4 x 16mm Screw (32).
3
14
32
1
6
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
ASSEMBLY
2.
Attach the Frame (1) to the Front Leg (3) with
two M8 x 81mm Button Bolts (47), a Short
Support Plate (30), and two M8 Nylon Locknuts
(34).
Do not tighten the Nylon Locknuts yet.
Attach the Bumper (22) to the Frame (1) with
two M4 x 16mm Screws (32).
47
22
32
47
30
3
34
1
2
