11
STORING THE WEIGHT BENCH
To store the weight bench, first lay the Backrest (11)
flat (see ADJUSTING THE BACKREST on page
10). Next, remove the indicated Curl Knob (24).
Then, lift the Frame (1) to the position shown and
tighten the Curl Knob into the indicated hole.
Make
sure that the Curl Knob is inserted through the
Frame.
ATTACHING THE CURL POST
Insert the Curl Post (7) into the Front Leg (3) and
align the holes in the Front Leg and the Curl Post.
Secure the Curl Post with a Curl Knob (24).
Make
sure that you fully tighten the Curl Knob.
7
3
24
24
1
11
Hole
