8
5. Have a second person set the Seat Carriage
(15) on the Seat Post (18) and hold it in place.
Identify the Seat Bracket (14), which is smaller
than the Handlebar Bracket (not shown).
Next, insert the Seat Bracket (14) into the Seat
Carriage (15), and align the hole in the Seat
Bracket with the hole (B) in the top of the Seat
Post (18).
Insert the Seat Knob (19) upward into the Seat
Post (18), and tighten the Seat Knob into the
Seat Bracket (14).
Then, press the Carriage Cap (13) into the Seat
Carriage (15).
5
15
14
19
B
13
6
27
Avoid pinching
the Main Wire (25)
25
29
6. Using a standard screwdriver, carefully remove
the Shield Cover (26) from the Left and Right
Shields (37, 58).
Tip: Avoid pinching the Main Wire (25). Orient
the Upright (27) as shown. Have a second
person hold it on the Frame (50).
Attach the Upright (27) with four M8 x 20mm
Screws (29); start all the Screws, and then
tighten them.
50
18
26
37, 58
