background image

15

FEATURES OF THE CONSOLE

IMPORTANT: To activate your console and begin 

using its exclusive features, see assembly step 14 

on page 13.

The advanced console offers an array of features 

designed to make your workouts more effective and 

enjoyable. 

When you use the manual mode of the console, you 

can change the resistance of the pedals with the touch 

of a button. 

As you exercise, the console will provide continuous 

exercise feedback. You can even measure your heart 

rate using a compatible heart rate monitor.

You can also connect your tablet to the console and 

use the iFit

®

 app to record and track your workout 

information.

The console also offers a selection of onboard work-

outs. Each onboard workout automatically changes the 

resistance of the pedals

 

and prompts you to maintain 

a target pedaling speed as it guides you through an 

effective workout.

To use the manual mode, see page 16. To use 

an onboard workout, see page 18. To connect 

your tablet to the console, see page 19. To 

connect your heart rate monitor to the console, 

see page 19. To change console settings, see 

page 20.

Note: If there is a sheet of plastic on the display, 

remove the plastic.

Note: The console can display speed and distance 

in either standard or metric units. To change the unit 

of measurement, press the St/M button repeatedly. 

For simplicity, all instructions in this section refer to 

standard units. 

Fletch

ELPF02920

EBPF26820

PFEL02920

PFEX26820

CONSOLE DIAGRAM

HOW TO USE THE CONSOLE

Содержание 235 CSX





























Отзывы: