Pro-Form 1110 E Elliptical Скачать руководство пользователя

Страница: 14 / 40

12. Apply grease to a Pedal Arm Axle (64).

Next, slide an M8 Washer (97) and an Axle
Spacer (77) onto an M8 x 13mm Screw (82), and
tighten the Screw a few turns into the Pedal Arm
Axle (64).

While a second person holds the front end of the
Right Pedal Arm (58) inside the bracket on the
Right Upper Body Leg (60), insert the Pedal Arm
Axle (64) into both parts.

Slide an M8 Washer (97) and an Axle Spacer
(77) onto another M8 x 13mm Screw (82), and
tighten the Screw a few turns into the Pedal Arm
Axle (64).

Then, tighten both Screws at the

same time.

Repeat this step on the other side of the
elliptical.

See assembly step 5.

Tighten the M10 x 25mm

Screws (99).

Grease

13. Orient the Shield Cover (75) assembly as shown.

While a second person holds the Shield Cover
(75) assembly near the Upright (4), connect the
Fan Extension Wire (146) to the Fan Wire (136).

Tip: Avoid pinching the wires.

Press the

Shield Cover (75) onto the Left and Right Shields
(73, 74).

73, 74

Avoid pinching

the wires

146

136

Содержание 1110 E Elliptical









































Результаты поиска

Содержание 1110 E Elliptical

Отзывы:

Похожие инструкции для 1110 E Elliptical

Бренды по названию

Популярные бренды

Pro-Form 1110 E Elliptical, Руководство пользователя

Результаты поиска

Содержание 1110 E Elliptical

Отзывы:

Похожие инструкции для 1110 E Elliptical

Бренды по названию

Популярные бренды