Pro-face PS5000 Series, Руководство пользователя

Страница: 50 / 148

Slim Panel Connections
50
4 Place the terminal block in the power connector and tighten the screws:
NOTE:
The recommended torque to tighten these screws is 0.5 Nm (4.5 lb-in).
5 Attach the power cord and tighten the screws:
CAUTION
OVERTORQUE AND LOOSE HARDWARE

Do not exert more than 0.5 Nm (4.5 lb-in) of torque when tightening the installation fastener,
enclosure, accessory, or terminal block screws. Tightening the screws with excessive force
can damage the installation fastener.

When fastening or removing screws, ensure they do not fall inside the Industrial Personal
Computer chassis.
Failure to follow these instructions can result in injury or equipment damage.
Step Action