Pro-face PS5000 Series, Руководство пользователя

Страница: 45 / 148

PS5000 Series (Slim Panel Type Atom Model) User Manual
45
Connecting the DC Power Cord
Precaution
When connecting the power cord to the power connector on the Slim Panel, first ensure that the
power cord is disconnected from the DC power supply.
NOTE: The power cord can be connected to an AC power module (PFXZPSPUAC2).
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

Remove all power from the device before removing any covers or elements of the system, and
prior to installing or removing any accessories, hardware, or cables.

Unplug the power cable from both the Industrial Personal Computer and the power supply.

Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power to the unit.

Use only the specified voltage when operating the Industrial Personal Computer. The DC unit
is designed to use 24 Vdc input.
Failure to follow these instructions will result in death or serious injury.
WARNING
EQUIPMENT DISCONNECTION OR UNINTENDED EQUIPMENT OPERATION

Ensure that power, communication, and accessory connections do not place excessive stress
on the ports. Consider the vibration in the environment.

Securely attach power, communication, and external accessory cables to the panel or cabinet.

Use only D-Sub 9-pin connector cables with a locking system in good condition.

Use only commercially available USB cables.
Failure to follow these instructions can result in death, serious injury, or equipment damage.