2-6
PS-400G Series User Manual
3.
Slide the fastener toward the rear of the PS-G unit.
4.
Slowly tighten each fastener attachment screw in sequence (top, bottom, left side, right side),
until all fasteners are evenly and securely tightened. The proper torque for tightening an
attachment screw is 0.5N·m
CAUTIONS
Fastener attachment screws must be perpendicular to the panel. If they are not,
the PS-G unit may fall out of the panel.
Make sure the screws are tightened within the specified range of torque. Over-
tightening the fastener attachment screws may damage the PS-G unit.
