manualshive.com logo in svg

Pro-face PS-3700A, Руководство пользователя

Поделиться
Скачать
Pro-face PS-3700A Скачать руководство пользователя страница 79

Compact Panel Computer PS-3700A (Pentium

®

4M - 1.7GHz Model) User Manual

4-8

„

System Monitoring/RAS Applications: PSA_Smon.exe/PSA_Wps.exe

The RAS and System Monitoring features allow users to monitor temperature voltage, and fan operation 
alarms. This program runs on Windows

®

.

‹

System Monitoring Program: PSA_Smon.exe

‹

Watchdog Parameter Setup Program: PSA_Wps.exe

„

System File: Psamon.sys

This system file allows use of the RAS and System Monitoring features. This file should not be modified. If it 
is modified, the RAS and System Monitoring features may not operate correctly.

„

Backlight OFF Screen Saver (Backlight Control.scr)

This software is used to turn OFF the PS-A’s backlight after a specified period of inactivity. The use of this 
feature will help to extend the life of the PS-A’s backlight.

„

Screen Display ON/OFF Utility (DISP.EXE)

This command line utility is used to turn OFF both the PS-A’s backlight and display.

Settings Used

DISP [ON/OFF] 

Option Switch

ON: Displayed / OFF: Not Displayed

Return Value

0: Completed Normally / -1: Option Switch Error

„

Keyboard Emulator (Keyclick.exe)

This program allows the User’s mouse operation to perform keyboard-like data input.
It is required to agree to "IN-fINITY soft Keyclick32  License Agreement".

SEE

5.2.3 System Monitoring Operation (PSA_Smon.exe) (page5-9)

SEE

5.2.2 System Monitoring Property Settings (PSA_Wps.exe) (page5-7)

•

Certain application programs may not allow the PS-A’s backlight to turn OFF. Please test each 

program individually to check if the screen saver will operate correctly.

• If your application requires that the OS continuously turn the backlight display ON 

and OFF, be sure to use the backlight control dll, PSA_BLC.DLL.

SEE

A.3 Consent Agreement (pageApp-6)

•

Certain application programs do not support this keyboard emulator. Please test each application 

individually to check if the keyboard emulator will operate correctly. 

•

This application cannot be used to enter Windows

®

 startup screen User Name and Password 

information.

•

To change the Keyclick program’s font size a keyboard is required. 

•

For details concerning the Keyclick program’s operation, simply click on the HELP button to 

call up the program’s online help data.

Содержание PS-3700A




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды