Pro-face PS-3700A, Руководство пользователя

Страница: 54 / 131

Chapter 3 System Setup
3-7
„
Swap Floppy Drive
This setting swaps Drives A and B. The available settings are [Disabled] or [Enabled].
The factory default setting is [Disabled] and is recommended for most users.
„
Boot Up Floppy Seek
The setting checks whether the floppy disk drive is installed during the system boot-up process.
The available settings are [Disabled] or [Enabled]. The factory default setting is [Enabled] and is recom-
mended for most users.
„
Boot Up NumLock Status
This setting specifies the NumLock key status upon the startup. The available settings are [On] and [Off]. The
factory default setting is [On] and is recommended for most users.
„
Typematic Rate Setting
The setting specifies the keyboard speed used when repeating characters. The available settings are [Enabled]
and [Disabled]. The factory default setting is [Disabled] and is recommended for most users.
„
Typematic Rate (Chars/Sec)
This setting specifies the actual typematic rate (repeated character input per second) when the [Typematic
Rate Setting] option is set to [Enabled]. The settings are used to determine how many repeats are performed in
one second. The factory default setting is [6] and is recommended for most users.
„
Typematic Delay (Msec)
When [Typematic Rate Setting] is set to [Enabled], this setting determines the delay period until the initial
repetition is started. The [250] selection is factory set and is recommended for most users.
„
Security Option
This setting designates the area to request a password. If a password needs to be entered, select [Setup] in
BIOS setup, or [System] during system startup. This setting is NOT available if the password is not set in the
[SET SUPERVISOR PASSWORD] or [SET USER PASSWORD] areas. The factory default setting is [Setup]
and is recommended for most users.
[SET SUPERVISOR PASSWORD]
[SET USER PASSWORD]
SEE
3.2.13 Set Supervisor Password (page3-23)
SEE
3.2.14 Set User Password (page3-23)