Pro-face PS-3000B Series, Руководство по оборудованию

Страница: 80 / 83

Chapter 4 Maintenance
4-3
(4) After reattaching the filter to the filter cover, reattach the fan cover with its cover attachment screw (1).
The torque should be 0.5 to 0.6N
•
m.
4.2 Periodic Check Points
To keep your PS-B unit in its best condition, please inspect the following points periodically.
„
PS-B Operation Environment
†
Is the operating temperature within the allowable range?
PS3000-BA: 0°C to 50°C (without HDD) 5°C to 50°C (with HDD)
PS3001-BD: 0°C to 50°C
†
Is the operating humidity within the specified range?
PS3000-BA: 10 to 90%RH (Not condensing, wet bulb temperature: 39°C or less. Wet bulb temperature
with HDD: 29°C or less.)
PS3001-BD: 10 to 90%RH (Not condensing, wet bulb temperature: 39°C or less.)
†
Is the operating atmosphere free of corrosive gasses?
When using the PS-B unit inside an enclosure, the enclosure's atmosphere is the ambient environment.
„
Electrical Specifications
†
Is the input voltage appropriate?
AC type: AC85 to 265V, 50/60Hz
DC type: DC19.2 to 28.8V
„
Related Items
†
Are all power cords and cables connected properly? Have any become loose?
†
Are all mounting brackets holding the unit securely?
• Do not wring the filter to dry it.
• When drying the filter, dry it without exposing it to direct sunlight.
• Allow it to air dry completely before reattaching to the PS-B.
• Be sure the fan cover is securely attached to the PS-B unit. This is to ensure the
fan cover does not fall of while the PS-B unit is operating.