Pro-face PS-3000B Series, Руководство по оборудованию

Страница: 33 / 83

PS-3000B Series Hardware Manual
2-10
‹
Switches
The following switch settings corresponding to each Serial Interface need to be signified. The switches are on
the PS-B’s circuit board.
• To change the switch settings
The switches are on the PS-B’s circuit board. First of all, remove the cover.
<For PS3000-BA without built-in HDD unit>
(1) Unscrew the screws (2) from the Expansion Board Cover,
and remove the cover. When replacing the cover, the
torque required for these screws is 0.5 to 0.6N
•
m.
(2) Unscrew the screws (2) of the IDE cover and remove the
IDE cover. When replacing the cover, the torque required
for these screws is 0.5 to 0.6N
•
m.
<For PS3000-BA with built-in HDD unit>
(1) Unscrew the screws (2) from the Expansion Board Cover,
and remove the cover. When replacing the cover, the
torque required for these screws is 0.5 to 0.6N
•
m.