Pro-face Pro-face ST Series, Руководство пользователя

Страница: 118 / 131

Chapter 7 RUN Mode and Errors
7-19
7.5.2 Illeagal Address in Screen Data
Caused by an overlap of addresses.
After the error message, error codes, as listed below, will appear. If the error cannot be fixed, please report the
error code and details on how the error developed to your local ST distributor.
Overlapping Addresses
E.g. When the starting address of the System Data Area is set to 100, and the tag below is setup:
Starting from addresses 99, two(2) words are used, which causes it to overlap address 100.
Error 1 Error 2 Meaning
0C1
191
All or part of the T-tag
*1
or S-tag address range overlap the
addresses of System Data Area.
192
193
0C2
194
All or part of the System Data Area address, A-tag, or S-tag address
range overlap the addresses setup in a T-tag.
*1
195
196
0C3
197
All or part of a T-tag
*1
, S-tag or K-tag address range overlap the
address range set in an A-tag (Alarm Message.)
*1 For details about the T-tag (trend graph) and A-tag (alarm messages),
198
199
0C9 19B
All or part of a T-tag
*1
, S-tag or K-tag address range overlap the
address range set in an A-tag (Log alarm.)
SEE
GP-PRO/PBIII for Windows Tag Reference Manual (included with the screen editor software)
• The address becomes an address repetition error when there is a problem in how to come in suc-
cession (repetition range over time etc.), except for the above-mentioned.
Tag Name/
Part ID No.
Word Address Tag Format
N1 99 BCD32
Error No.2
(Refer to Table below)
Error No.1
ILLEGAL ADDRESS IN SCREEN AREA (00B:XXX:XXX)