Pro-face PFXGP4301TADR, Руководство по установке

Страница: 46 / 50

47
USB Cable Clamp
En
g
lish
2. Removing the USB Cable
3 As shown, pass the tie through the clip hole. Next, turn the tie and
pass it through the head so that the USB cable can pass through
the center of the tie loop. The clip is now attached to the USB
cable.
Note:
• Check the direction of the head beforehand. Make sure the USB cable is
through the center of the tie loop and that the tie can pass through the head.
• You can substitute the tie provided with PFXZCBCLUSA1 (manufactured by
Pro-face) or other commercially available ties with a width of 4.8 mm
[0.19 in] and thickness of 1.3 mm [0.05 in].
4 While pressing the grip on the clip, insert the cable from step 3 all
the way into the USB host interface. Make sure that the clip tab is
secured to the USB cable attached to the GP unit.
Step Action
1 Remove the USB cable while pushing the grip section of the clip.