Pro-face GP2501-SC41-24V, Руководство по установке

Страница: 8 / 12

Use rough metric type M2.6 x 0.45p threads to hold the cable’s set
(fastening) screws in place.
When creating a cable, please be aware of the following:
<For RS-422 Connectors>
• The following pairs of pin no.s must be connected (shorted).
...#18 (CSB) <-> #19 (ERB)
...#21 (CSA) <-> #22 (ERA)
• Connecting the #9 (TRMX) and #10 (RDA) wires, adds a termination
resistance of 100
Ω Ω Ω Ω Ω
between RDA and RDB.
• Use a 4-wire cable when the PLC type is Memory Link and the cable
is RS-422.
<For RS-232C Connectors>
• Do not connect #9 (TRMX), #10 (RDA), #11 (SDA), #15 (SDB), #16
(RDB), #18 (CSB), #19 (ERB), #21 (CSA), and #22 (ERA).
• The #1 (FG) terminal should only be connected if it is required by the
device being connected to.
„
Printer Interface (Half Pitch 20-pin)
When connecting a printer, use Digital's printer cable (PSM-PRCB00).
Pin Arrangement Pin # Signal Name Description
1 GND Ground
2 RESERVED Reserved
3 PDB5 Data Signal
4 PDB4 Data Signal
5 PDB3 Data Signal
6 GND Ground
7 SLCT Select Condition(Input)
8
PDB0
Data Signal
9 PSTB Strobe Signal(Output)
10 BUSY Busy Signal(Input)
11 PDB7 Data Signal
12 PDB6 Data Signal
13 GND Ground
14
ERROR
Printer Error(Input)
15 GND Ground
16 PDB2 Data Signal
17 PDB1 Data Signal
18 PE Paper End
19
INIT
Initialize Signal(Output)
20 GND Ground
1
11
10
20